w66利来

產品中心 PRODUCT DISPLAY
當前位置： 首頁  >> 產品中心  >> 管座/支管台  >> 鑲入式支管嘴 | Sweepolet

鑲入式支管嘴 | Sweepolet

Sweepolet Specification:

Size/尺寸 1/2" NPS TO 24" NPS
Class/壓力等級 3000LB, 6000LB, 9000LB (STD, SCH80/XS, SCH160, XXH)
Type/連接形式 Buttweld/對焊
Surface Treatment/表面處理 Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Soldering
Materal/材質 Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel
Manufacturing process/製造工藝 Cutting, Heat treatment, Forging, Machining
鋸切、熱處理、模鍛、機加工
Manufacturing Standards/製造標準 ASME B31.3


Sweepolet Material Grades:

Stainless Steel/不鏽鋼 ASTM A 182F304, F304L, F304H, F316, F316L, F316Ti, F310, F310S, F321, F321H, F317, F347, F347H, F904L
Duplex & Super Duplex Steel/雙相鋼 ASTM A 182 – F51, F53, F55, S31803, S32205, S32550, S31254, SMO254, S32750, S32760, S32950.
Carbon Steel/碳鋼 ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2
Alloy Steel/合金鋼 ASTM / ASME A 182, ASTM / ASME F5, F9, F11,F22, F 91
Copper Alloy Steel/銅合金 Copper Alloy Steel Forged Threaded 90 Deg Elbow : ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500, ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)
Nickel Alloy/鎳合金 ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276)


Sweepolet Dimesions:

   
 
Sweepolet Dimesions Table :
Run Size Outlet Size Dimensions
Inches *A B
6 to 36 1 1/4 1 1/4 4
6 to 36 1 1/2 1 3/4 5 1/2
6 to 36 2 1 1/2 5 1/2
6 to 36 3 1 21/32 7
6 to 36 4 2  1/32 8 3/4
10 to 36 6 2 11/16 13
12 to 36 8 3 15
16 to 36 10 3 1/8 18 1/2
16 to 36 12 3  5/16 20 1/2
20 to 36 14 3 5/8 24
24 to 36 16 3 3/4 28
24 to 36 18 4 5/8 31
24 to 36 20 5 1/8 33
30 to 36 24 5 5/8 38
A sweep outlet is a type of  integrally reinforced branch connection used to facilitate radiography, one or many non-destructive tests (NDT) used to inspect welds.
This type of NDT uses Gamma or X-rays to penetrate material. The rays are then passed through film on the opposite side .the exposed film is examined as a negative and displays the internal features The thickness of the weld is shown through lighter or darker areas on the film.

聯繫w66利来

移動端網站

快捷導航
首頁
關於w66利来
產品中心
材料牌號
質量控制
下載中心
應用領域
新聞資訊
聯繫w66利来
版權所有 copyright © 中國·w66利来 All Right Reserved. 滬ICP備12010866號-1